John Deere 210 — Adjust PTO clutch

Adjustments

For the John Deere 210, from the John Deere service manual.

Applies to: John Deere 210

Procedure

1. Adjust PTO link so toggle is overcenter 1-1/2 inches or 1/8 inch forward of parallel.
2. Set fulcrum bolt 2-1/2 inches from lock nut to clutch arm.
3. Adjust clutch spring so clutch arm to outside washer is 1-1/4 inches.
4. Adjust PTO brake to 1/32-inch gap with PTO engaged.

Full service-parts list: John Deere 210 →

Source: John Deere service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More John Deere repair guides →