Iveco/FPT — Engine setting operations for the assembly on turning stand
Maintenance
From a Iveco/FPT service manual — check it applies to your exact model before use.
Browse Iveco/FPT generators & specs →
Before you start
- Warning: the oil filter contains inside aprx. 1 kg. of engine oil. Provide for oil recovery and disposal in compliance with the law and regulations in force.
- Warning: avoid contact of engine oil with the skin: in case of skin contamination rinse in running water.
Procedure
- Disassemble lubrication oil exhaust pipe from the turbo-blower.
- Disassemble pipes from the union fitting the lubrication oil filter.
- Disassemble the starter.
- Assemble bracket bearing 99361037 using the four screw threaded ports.
- On left hand side, disassemble oil filter and bracket.
- Remove oil level rod together with guide pipe.
- Assemble second bracket 99361037.
- Lift engine using rocker arm 99360595 and put it on turning stand 99322205.
- Drain oil through cap underneath plug.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Iveco/FPT service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.