Iveco/FPT C13 — Water pump/alternator control belt change
Maintenance
For the Iveco/FPT C13, from the Iveco/FPT service manual.
Applies to: Iveco/FPT C13
Before you start
- Belt tensioner is automatic and requires no adjustment
Procedure
- Operate using a specific tool on the belt tensioner in the direction shown by the arrow to remove the belt.
- Mount the new belt while working the tensioner in the same direction.
- Visually check the belt is not worn out or broken before refitting.
Tools required
- Belt tensioner tool Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Iveco/FPT service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.