Iveco/FPT C13 — Engine oil change
Maintenance · Lubrication system
For the Iveco/FPT C13, from the Iveco/FPT service manual.
Applies to: Iveco/FPT C13
Before you start
- Motor oil reaches very high temperature; wear protection gloves
- Do not mix oils with different features when topping up
Procedure
- Drain oil when engine is hot.
- Place a container under the drain plug (3).
- Unscrew the plug, remove the dipstick (1) and inserting plug (2) to ease oil outflow.
- After complete drainage, screw the plug and carry out clean oil filling.
- Pour the prescribed quantity and quality of oil through filler (2) of tappet cover.
- Check the level through the dipstick until next to the maximum level notch.
Source: Iveco/FPT service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.