Iveco/FPT C13 — Cooling system check
Maintenance
For the Iveco/FPT C13, from the Iveco/FPT service manual.
Applies to: Iveco/FPT C13
Before you start
- Do not operate immediately after engine disconnection; wait for cooling
- Protect eyes and skin from high pressure jet of cooling liquid
Procedure
- Check pipes from engine to radiator and vice versa when engine disconnected and running.
- Note any seepage and the state of pipes, especially near coupling clamps.
- Verify the radiator is clean and the fan flywheels work correctly.
- Check for leakage from connectors, manifold and radiating unit.
- Check cooling liquid density every year before winter and replace every two years.
Source: Iveco/FPT service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.