Home›Repair guides›Isuzu›Removal of Water from the Fuel

Isuzu — Removal of Water from the Fuel

Maintenance · Fuel system / fuel filter

From a Isuzu owner's manual — check it applies to your exact model before use.

Browse Isuzu generators & specs →

Before you start

  • If the cup is removed without turning the fuel filter lever just above, the fuel may flow out.
  • The cartridge and cup contain fuel; take care not to spill it during disassembly.
  • Perform the fuel system air bleeding after the water in the fuel is drained.

Procedure

  1. Turn the fuel filter lever just above (close) until it stops to cut off the fuel.
  2. Loosen the ring nut, remove the cup together with the element, and drain the fuel.
  3. Clean the cup, install the element and tighten to the filter body with the ring nut.
  4. Turn the fuel filter lever just below (open) until it stops to conduct air bleeding for the fuel.

Source: Isuzu owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Isuzu repair guides →