Isuzu — Oil filter element MAINTENANCE SCHEDULE”
A Isuzu service procedure — check it applies to your exact model before use.
Browse Isuzu generators & specs →
Procedure
- 1. The service intervals after 1000 operation hours should also be made every 250 operation hours in accordance with this check and maintenance schedule.
- 2. When the servicing on the asterisked (+) items are necessary, consult the equipment supplier. EXPLANATION OF MAINTENANCE SCHEDULE The fallowing is a brief explanation of the services listed in the preceding Engine Maintenance schedule.
- 1. Oil level and oil fouli ng Check that the oil level is between the max. level mark and the min. level mark. Oil leakage check Oil pressure gauge registration Oil pressure warning lamp Engine oil replacement Oil filter element replacement Fuel lea kage check Draining water in fuel filter Fuel filter element replacement
- 10. Injection nozzle check Drain oi] to the max. level mark if oil level is above the max. level mark. Add oil to the max. level mark if oil is below the min. level mark. Replace any damaged or malfunctioning parts which could cause leakage. Engine oil pressure is normal at about 3 to 5 kg/cm? in warmed-up condition. Check and repair the lubrication oil system, if it is abnormal. Warning lamp is off while engine running. If it stays on, check and repair the lubrication system. Change oil every 250 hours. Change element every 500 hours. Inspect the fuel lines for damage which could cause leakage. Replace any damaged or malfunctioning parts. Drain water in fuel filter if water reaches the fuel element. Change element every 500 hours. Check and adjust injection opening pressure and spray condition. (This is a recommended maintenance) a oe
- 11.
- 12.
- 13.
- 14.
- 15.
- 16.
- 1?.
- 18.
- 13.
- 20.
- 21.
Source: manual:ISUZU Instruction Manual 3LA1 3LB1 3LD1 2000.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.