HomeRepair guidesOil Filter Replacement

Isuzu DCA180SSI/DCA180SSIU — Oil Filter Replacement

For the Isuzu DCA180SSI/DCA180SSIU.

Browse Isuzu generators & specs →

Before you start

  • After the oil cartridge has been replaced, the engine oil will drop slightly

Procedure

  1. Remove the old oil filter.
  2. Apply a film of oil to the gasket on the new oil filter.
  3. Install the new oil filter.
  4. Run the engine for a while and check for leaks before adding more oil if needed.
  5. Clean excessive oil from engine.

Specs & torque values

  • Oil filter cartridge

Source: manual:DCA180SSI-180SSIU-rev-1-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.