Isuzu — Important Operations (Disassembly Steps - 1)

A Isuzu service procedure — check it applies to your exact model before use.

Browse Isuzu generators & specs →

Procedure

1. 12. Fuel Injection Pipe with Clip
2. 1) Loosen the injection pipe sleeve nuts at the delivery valve side. Do not apply excessive force to the injection pipes.
3. 2) Loosen the injection pipe clips.
4. 3) Remove the injection pipes.
5. 13. Injection Pump
6. 1) Remove the six injection pump bracket bolts from the cylinder body timing gear case.
7. 2) Remove the inject ion pump rear bracket bolts from the rear bracket.
8. 3) Pull the injection pump with the injection pump timing gear free from the rear.

Source: manual:isuzu_4jb1_workshop_manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.