Home›Repair guides›Isuzu›Oil filter removal and installation

Isuzu 4le1t — Oil filter removal and installation

Maintenance · Lubrication system

For the Isuzu 4le1t, from the Isuzu service manual.

Applies to: Isuzu 4le1t, Isuzu 4LE1 engine

Parts for this job

Part numbers from the service-parts lists for Isuzu 4le1t, Isuzu 4LE1 engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove the oil filter using the oil filter wrench (remote filter type / cartridge type).
  2. Apply engine oil to the O-ring of the oil filter.
  3. Install the oil filter using the oil filter wrench.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • 14.7 — 20.6 N·m {1.5 — 2.1 kgf·m/10.8 — 15.2 lb·ft}

Full service-parts list: Isuzu 4le1t →, Isuzu 4LE1 engine →

Source: Isuzu service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Isuzu repair guides →