International — Standard Terminals
Repair & overhaul · Wiring terminals
From a International service manual — check it applies to your exact model before use.
Procedure
- Cut the cable just before the insulation wings on the terminal.
- Remove the insulation being careful not to cut any of the wire strands.
- Position cable in the new terminal.
- Hand crimp the core wings first, then the insulation wings.
- Solder all hand crimped terminals and electrically check for continuity.
Tools required
- Recommended crimp tool Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: International service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.