International — Procedure For Erasing All Learned Transmitters
Operation · Remote Keyless Entry (RKE)
From a International service manual — check it applies to your exact model before use.
Before you start
- This learning procedure cannot be performed during the same Ignition cycle as the erase all learned transmitters procedure.
Procedure
- Cycle the Ignition from Off to On; Step 2 must be initiated within 10 seconds of this Ignition event.
- On the Driver Door Pod hold down the Driver Window-Up, Driver Window-Down, and Unlock switches and depress and hold the Lock switch for at least 5 seconds (6 or 7 seconds recommended).
- After the 5 seconds the Door Pod RKE unit will erase all learned transmitters and the RKE will be disabled.
Source: International service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.