Ingersoll Rand — Wire Rope Lubrication
Maintenance
From a Ingersoll Rand owner's manual — check it applies to your exact model before use.
Before you start
- Do NOT use an acid-based solvent; only use cleaning fluids specified by the wire rope manufacturer.
Procedure
- Clean with a brush or steam to remove dirt, rock dust or other foreign material on the surface of the wire rope.
- Apply a wire rope lubricant.
- Brush, drip or spray lubricant weekly, or more frequently depending on severity of service.
Tools required
- Brush Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Ingersoll Rand owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.