Ingersoll Rand — Start-Up After Storage

Operation · winch

From a Ingersoll Rand owner's manual — check it applies to your exact model before use.

Procedure

1. Give the winch an inspection conforming to requirements of 'Winches Not in Regular Use'.
2. Pour a small amount of ISO VG 32 (SAE 10W) oil in motor inlet port.
3. Operate motor for 15 seconds in both directions to flush out any impurities.
4. The winch is now ready for normal use.

Source: Ingersoll Rand owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ingersoll Rand repair guides →