Ingersoll Rand — Setting the Overload

Adjustments · overload valve

From a Ingersoll Rand owner's manual — check it applies to your exact model before use.

Procedure

1. Attach load line to a load calibrated to winch rated capacity for the mode being tested and shift control lever to haul-in.
2. If overload valve activates, reset overload valve; winch is ready for normal operation.
3. If winch lifts higher than 160% of rated load, lower load and turn jam nut counterclockwise in 1/4 turn increments until overload valve activates.

Source: Ingersoll Rand owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ingersoll Rand repair guides →