Ingersoll Rand — Removal of Ball Sleeve (91) releases six Balls (97).

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

1. 7. Slide off Guide (89), Spring (90), Ball Sleeve, Thrust Race (92) and Thrust Bearing (93).
2. 8. Remove Thrust Race (94), releasing six Balls (98).
3. 9. Remove Retaining Ring (103) and rotate Bit Holder (100) to remove twelve Balls (99).
4. 10. Separate Bit Holder and Spindle (96), releasing eleven Balls (99).

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.