Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Pistol Grip Housing

Ingersoll Rand — Pistol Grip Housing

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. 1. Assemble Muffler (31) and Screen (30) into Housing, securing with Retaining Ring (29).
  2. 2. For Models 41TS and 41TP, coat Valve Rod (27) with the recommended oil and install Valve Rod and Spring (26) in Housing.
  3. 3. Install Inlet Adapter (25) in tool.
  4. 4. Clean and replace Screen (1) in Inlet Adapter.
  5. 5. Coat Trigger (44) or Button (46) with the recommended oil and install in Reverse Cam (43).
  6. 6. For Models 41TS and 41TP, lubricate and install O-Ring (42) on Trigger (44).
  7. 7. Install Springs (41) on Reverse Cam, flat side away fromReverse Cam, and install Reverse Cam and components in Housing, aligning holes in

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.