Ingersoll Rand — Manual Drum Brake Adjustment
Adjustments
From a Ingersoll Rand service manual — check it applies to your exact model before use.
Procedure
- Release wire rope tension on the drum.
- Raise handle (104) to free brake bands (128).
- Remove cotter pin (102) and pin (101).
- Rotate link stud (103) clockwise to increase brake torque.
- Install pin (101) and check adjustment.
- Adjust until brake lever over center position can be attained with 50 to 100 lb. (23 to 45 kg) force on the handle.
- Install cotter pin (102) when adjustment is completed.
Specs & values
- 50 to 100 lb (23 to 45 kg) force on handle
Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.