Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Lubrication

Ingersoll Rand — Lubrication

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. 1. Lubricate the clutch with Ingersoll Rand No. 105 or Ingersoll Rand No. 115 Grease.
  2. 2. Lubricate the gearing with Ingersoll Rand No. 105 Grease.
  3. 3. Use Ingersoll Rand No. 10 Oil for lubricating the motor. Inject approximately 1 to 2 cc of oil into the air inlet before attaching the air hose.
  4. Disassembly
  5. General Instructions

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.