Ingersoll Rand — Load Test
Operation · Winch
From a Ingersoll Rand service manual — check it applies to your exact model before use.
Before you start
- Brakes must hold a 125% rated load with full drum without slipping
Procedure
- Load test all new, extensively repaired or altered winches prior to initial use.
- Test loads shall not be more than 125% of the rated line pull.
- Test FA2 winch at 7223 lb. (3283 kg) with wire rope on the first layer of the drum.
- Test FA2.5 winch at 8223 lb. (3738 kg) with wire rope on the first layer of the drum.
- Furnish a written report confirming the rating of the winch.
Specs & values
- 125% of rated line pull
- FA2: 7223 lb (3283 kg)
- FA2.5: 8223 lb (3738 kg)
Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.