Ingersoll Rand — Limit Switch Adjustment
Adjustments
From a Ingersoll Rand owner's manual — check it applies to your exact model before use.
Before you start
- Ensure limit switch setpoints are established and operating properly before putting winch into service.
- Use two people to make adjustments.
Procedure
- Remove cap from limit switch cover.
- Partially unscrew center nut.
- PAYOUT: rotate (#1) screw counterclockwise while slowly paying out until winch shuts off.
- HAUL-IN: rotate (#2) screw clockwise while slowly hauling in until winch shuts off.
- Tighten center nut.
- Reinstall cap on limit switch cover and tighten.
Specs & values
- Settings for limit switch are for overwound operation only
Source: Ingersoll Rand owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.