Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Lever Throttle

Ingersoll Rand — Lever Throttle

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. 1. Install Spring (16) in Housing, securing with Valve Body (17).
  2. 2. Install Reverse Sleeve (14) and O-Ring (13) in Housing, securing Valve Body.
  3. 3. Lubricate and install O-Ring (9) in Valve Block (10).

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.