Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Lever Throttle

Ingersoll Rand — Lever Throttle

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Before you start

  • NOTICE

Procedure

  1. 1. Install Spring (16) in Housing, securing with Valve Body (17).
  2. 2. Install Reverse Sleeve (14) and O-Ring (13) in Housing, securing Valve Body.
  3. 3. Lubricate and install O-Ring (9) in Valve Block (10).
  4. Install Valve Block (10) with counterbore towards Cap (21).
  5. 4. Install Valve Assembly (12) and Spring (11) in Housing, secur
  6. ing with Valve Block (10).

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.