Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Do not remove Roll Pin (47) or Bushing (48) unless damage is evident.

Ingersoll Rand — Do not remove Roll Pin (47) or Bushing (48) unless damage is evident.

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. 3. To remove Roll Pin or Bushing, press thru to reverse valve cavity.
  2. 4. To remove Trigger (44) or Button (46), Drive Pin (40) out of Housing, releasing Trigger or Button, Reverse Cam (43) and Springs (41).
  3. 5. For Models 41TS and 41TP, remove O-Ring (42), releasing Trigger from Reverse Cam (43).
  4. 6. Remove Inlet Adapter (25) and Screen (1).
  5. 7. For Models 41TS and 41TP, remove Spring (26) and Valve Rod (27).
  6. 8. Remove Retaining Ring (29), releasing Screen (30) and Muffler (31).

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.