Ingersoll Rand — Disassembly - Torque Tube

Repair & overhaul

From a Ingersoll Rand service manual — check it applies to your exact model before use.

Procedure

1. Rotate the regulator adjustment knob (145) counterclockwise until torque tube lowers to bottom of travel.
2. Turn off the main supply to the torque tube.
3. Disconnect main air supply from regulator at connector (142).
4. Remove the torque tool from the torque tube.
5. Disconnect air cylinder connecting clip (114) from attachment plate (117).
6. Remove capscrews (107), nuts (123) and washers (108).
7. Remove air cylinder (106).
8. Remove inner shaft assembly (109-117).
9. Remove capscrews (126), nuts (127) and washers (128).
10. Remove inner support tube (100) from outer support tube (129).

Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ingersoll Rand repair guides →