Ingersoll Rand — Disassembly of the Reverse Valve — 2902P
Repair & overhaul
From a Ingersoll Rand service manual — check it applies to your exact model before use.
Before you start
- The Knob Screw (36) is installed with Loctite.
Procedure
- The Knob Screw (36) is installed with Loctite.
- Unscrew and remove the Knob Screw. Remove the Reverse Valve Knob (35).
- Slowly rotate the Reverse Valve (11) back and forth while withdrawing it from the reverse valve bushing.
Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.