Ingersoll Rand — Disassembly of the Reverse Valve

Repair & overhaul

From a Ingersoll Rand service manual — check it applies to your exact model before use.

Procedure

1. Remove the four Backcap Bolts (14).
2. Lift the Backcap off of the rear of the Housing.
3. Discard the Backcap Gasket (15) and replace it with a new one when assembling the tool.
4. Use a hooked tool to remove the Reverse Valve (32) from the reverse valve bushing.
5. Remove and discard the Reverse Valve O-ring (31); replace with a new one when assembling.
6. Use a flat, thin blade screwdriver to remove the Reverse Lever Retaining Ring (19) and Reverse Lever Spring (20).
7. Remove the Reverse Lever from the Backcap.

Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ingersoll Rand repair guides →