Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Ingersoll Rand›Disassembly of the Handle

Ingersoll Rand — Disassembly of the Handle

Repair & overhaul

From a Ingersoll Rand service manual — check it applies to your exact model before use.

Procedure

  1. Clamp Trigger Handle Assembly in protected vise jaws with the Straight Inlet (10) upward.
  2. Using a wrench, unscrew and remove Inlet, Air Strainer Screen (9) and Valve Spring (8).
  3. Remove Throttle Valve Assembly (6) and Valve Plunger (5) from Handle.
  4. If Trigger (3) must be removed, use an arbor press to push Trigger Pin (4) from Handle and slide Trigger out.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ingersoll Rand repair guides →