Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Disassembly of the Gearing

Ingersoll Rand — Disassembly of the Gearing

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. 1. Remove clutch from tool. Refer to section on Clutch Disassembly.
  2. 2. Using a wrench on flats, remove Ring Gear (67) or (81).
  3. 3. Remove Snap Ring (71) and Washer (70).

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.