Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›No. 170 Grease into the impact mechanism.

Ingersoll Rand — No. 170 Grease into the impact mechanism.

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. to 12 ft-lb (13 to 16 Nm) torque.
  2. Remove the Impactool from the vise and inject 2 to 4 cc of Ingersoll Rand No. 170 Grease into the Grease

Tools required

  • the inside surface of the Hammer Case Bushing (38) and
  • place the Hammer Case (39) down over the Anvil and
  • Assembly of the Tool
  • of the Hammer Case Bushing (38) and insert the
  • assembled impact mechanism into Hammer Case (39).

Source: manual:04584348ed2b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.