Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Clutch Housing Disassembly and Bushing Removal

Ingersoll Rand — Clutch Housing Disassembly and Bushing Removal

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. Unscrew and remove the Clutch Housing Cap (103) from the Clutch Housing (100)
  2. Stand the Clutch Housing on a workbench with the bit end upward
  3. Drive the rearmost Bushing out of the Housing using hammer and blunt rod
  4. Press the forward Bushing out the bit end of the Housing

Tools required

  • hammer
  • blunt rod
  • press
  • snap ring pliers

Specs & torque values

  • Clutch Housing Cap (103)
  • Bushing

Source: manual:16575243ed2b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.