Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Clutch Housing Cap Removal and Assembly

Ingersoll Rand — Clutch Housing Cap Removal and Assembly

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. Unscrew and remove the Clutch Housing Cap from the Clutch Housing
  2. Stand the Clutch Housing on a workbench with the bit end upward
  3. Using a hammer and a blunt rod smaller in diameter than the bushing opening, drive the rearmost bushing

Tools required

  • hammer
  • blunt rod

Source: manual:16575243ed2b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.