Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Ingersoll Rand›Clutch Adjustment - Internal

Ingersoll Rand — Clutch Adjustment - Internal

Adjustments

From a Ingersoll Rand service manual — check it applies to your exact model before use.

Before you start

  • Clutch housing has left-hand threads.

Procedure

  1. Remove Clutch Housing, Bit Holder and Clutch Assembly from tool.
  2. With bit in Bit Holder, clamp bit in vise.
  3. Place Clutch Assembly on Bit Holder.
  4. Engage jaws, hold Clutch Assembly from turning. Then rotate Adjustment Nut with 7/8" wrench.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ingersoll Rand repair guides →