Ingersoll Rand — Clutch Adjustment - External
Adjustments
From a Ingersoll Rand service manual — check it applies to your exact model before use.
Procedure
- Rotate Sleeve until opening in Housing is visible.
- Depress bit to engage clutch, then rotate until notch in Adjustment Washer is visible.
- Insert No. 1 Phillips screwdriver in notch to turn gear teeth on Nut.
- Turning clockwise will decrease torque.
- Turning counterclockwise will increase torque.
Tools required
- No. 1 Phillips screwdriver Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Turning clockwise will decrease torque
- Turning counterclockwise will increase torque
Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.