Ingersoll Rand — Cleaning
Maintenance · Torque Tube components
From a Ingersoll Rand service manual — check it applies to your exact model before use.
Procedure
- Thoroughly clean all Torque Tube components in solvent.
- Use of a stiff bristle brush will facilitate removal of accumulated dirt and sediments on the columns.
- Wipe off each part after cleaning.
- Do not allow cleaning solvents to contact side plate wear pads.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.