Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Assembly Valve Stem with slot turned to accept Valve Assembly (8).

Ingersoll Rand — Assembly Valve Stem with slot turned to accept Valve Assembly (8).

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Procedure

  1. 7. Install Filler (6) and Exhaust Cap (5) in Housing, aligning lever with Valve Stem.
  2. 8. Install Valve Assembly (8) in Housing, being certain Valve Assembly seats in slot in Valve Stem.
  3. 9. Install Spring (7) in Housing, securing with Diffuser Washer (4), Spacer (3) and Inlet Adapter (2).
  4. 10. Clean and install Screen (1) in Inlet Adapter.

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.