Ingersoll Rand — Air Cylinder Installation

Repair & overhaul

From a Ingersoll Rand service manual — check it applies to your exact model before use.

Procedure

1. Attach air cylinder to cap end mounting bracket (120).
2. Attach air cylinder to rod end mounting bracket (119).
3. Install air cylinder mount nut from rod end of air cylinder (106).
4. Install air cylinder exhaust vent (105) at rod end of air cylinder (106).
5. Install regulator (145) and hex nipple (36) to air cylinder (106).
6. Connect air cylinder connecting clip (114) to attachment plate (117).
7. Install the torque tool on the torque tube.
8. Connect main air supply to regulator at connector (142).
9. Turn on the main supply to the torque tube.
10. Adjust regulator (145) adjustment knob so equal effort is required to raise and lower tube.

Source: Ingersoll Rand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Ingersoll Rand repair guides →