Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›

Ingersoll Rand — 

A Ingersoll Rand service procedure — check it applies to your exact model before use.

Browse Ingersoll Rand generators & specs →

Before you start

  • NOTICE

Procedure

  1. 7. Lubricate and assemble Thrust Bearing (93) and Thrust Race (92) to Spindle.
  2. 8. Coat Plunger (95) with the recommended oil and assemble to spindle, securing with Balls (97).
  3. Assemble two balls per hole. Secure balls with Ball Sleeve (91).
  4. 9. Assemble Spring (90) and Guide (89) to Spindle, securing with Retaining Rings (88). Install Clutch Spring (87).
  5. 10. Lubricate face of Adjustment Washer (86) and install on Spindle.
  6. 11. Thread Adjustment Nut (85) onto Spindle, securing with Snap Ring (84).
  7. 12. Lubricate Ball (101) of Bit Holder, using the recommended lubricant.
  8. 13. Assemble Springs (82) and (83) into Spindle.
  9. Assemble Spring (82) with large diameter into Spindle first.
  10. 14. Install Clutch Assembly in tool.
  11. The Clutch Housing (105) has left-hand threads.
  12. 15. Install Clutch Housing on tool.
  13. 16. Refer to Clutch Adjustment section in Product Information Manuals 80167356 or 80167364.
  14. Related Documentation
  15. For additional information refer to:
  16. Product Safety Information Manual Form 04585006.
  17. Product Information Manuals Form 80167356 or Form 80167364.
  18. Product Parts List Manual Form 16574592.
  19. Manuals can be downloaded from ingersollrandproducts.com

Source: manual:16575284_ed2_b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.