Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Clamp the hydraulic hoses to the trim pump

Hweiteh.Com — Clamp the hydraulic hoses to the trim pump

A Hweiteh.Com service procedure — check it applies to your exact model before use.

Browse Hweiteh.Com generators & specs →

Before you start

  • IMPORTANT! The ends of the hoses must al-

Procedure

  1. 7. Bend up the shift cable and clamp it to the inside of
  2. the transom.
  3. NOTE! Minimum bending radius for the cable:
  4. 200 mm (8").
  5. If the radius is smaller, the control will be stiff to oper-
  6. ate and there is a risk that it will lock up.

Source: manual:7746265 Installation Manual D4D6 IPS Aqua Inboard.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.