Hweiteh.Com — Centerline spacing

A Hweiteh.Com service procedure — check it applies to your exact model before use.

Browse Hweiteh.Com generators & specs →

Procedure

1. 10. Use a carpenter’s square to mark the transom.
2. Place a mark at (A), the selected engine centerline
3. distance to port of the transom centerline. Place a
4. second mark (B) at the selected engine centerline
5. distance to starboard of the transom centerline.

Source: manual:7746265 Installation Manual D4D6 IPS Aqua Inboard.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.