Hweiteh.Com — Aquamatic Transom

A Hweiteh.Com service procedure — check it applies to your exact model before use.

Browse Hweiteh.Com generators & specs →

Procedure

1. 4. Install the trim pump on the transom or on a bulk-
2. head. Make sure it is easily accessible for oil filling
3. and service, and well clear of any possible bilge wa-
4. ter.
5. IMPORTANT! The trim pump must be installed
6. vertically. Please refer to the picture above.

Source: manual:7746265 Installation Manual D4D6 IPS Aqua Inboard.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.