Home›Repair guides›Honda›Starting the Engine

Honda EG3500X — Starting the Engine

Operation

For the Honda EG3500X, from the Honda owner's manual.

Applies to: Honda EG3500X, Honda GX240 engine

Before you start

  • Do not allow starter grip to snap back against the engine.

Procedure

  1. Make sure AC circuit breaker is OFF.
  2. Turn fuel valve to ON.
  3. Move choke lever to CLOSE (do not use choke if engine is warm).
  4. Turn engine switch to ON.
  5. Pull starter grip lightly until resistance felt, then pull briskly.
  6. As engine warms up, gently turn choke lever to OPEN.

Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Honda repair guides →