Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Honda›Starting the Engine

Honda EG1400X / EG2500 — Starting the Engine

Operation · Generator

For the Honda EG1400X / EG2500, from the Honda owner's manual.

Applies to: Honda GX120K1 engine, Honda GX160K1 engine

Before you start

  • Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter or housing.

Procedure

  1. Make sure that the AC circuit breaker is in the OFF position.
  2. Turn the fuel valve to the ON position.
  3. Turn the choke lever to the CLOSE position.
  4. Turn the engine switch to the ON position.
  5. Pull the starter grip lightly until resistance is felt, then pull briskly.
  6. As the engine warms up, slowly turn the choke lever to the OPEN position.

Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Honda repair guides →