Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Honda›Disconnecting the Battery Cables

Honda EG1400X / EG2500 — Disconnecting the Battery Cables

Operation · DC battery charging circuit

For the Honda EG1400X / EG2500, from the Honda owner's manual.

Applies to: Honda GX120K1 engine, Honda GX160K1 engine

Procedure

  1. Stop the engine.
  2. Disconnect the negative (-) battery cable from the generator negative (-) terminal.
  3. Disconnect the other end of the negative (-) cable from the battery negative (-) terminal.
  4. Disconnect the positive (+) battery cable from the generator positive (+) terminal.
  5. Disconnect the other end of the positive (+) cable from the battery positive (+) terminal.
  6. Reconnect the vehicle grounded battery cable.

Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Honda repair guides →