Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Honda›Starting the Engine

Honda EB5000 — Starting the Engine

Operation

For the Honda EB5000, from the Honda owner's manual.

Applies to: Honda GX340 K1 engine

Before you start

  • Do not allow the starter grip to snap back. Return it slowly by hand.

Procedure

  1. Make sure the AC circuit breaker is in the OFF position.
  2. Turn the fuel valve to the ON position.
  3. Pull the choke rod to the CLOSE position.
  4. Make sure the auto-throttle switch is in the OFF position.
  5. Move the engine switch to the ON position.
  6. Pull the starter grip until compression is felt, then pull briskly.
  7. Push the choke rod to the OPEN position as the engine warms up.
  8. Turn the auto-throttle switch to AUTO after the engine has warmed up 2 or 3 minutes.

Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Honda repair guides →