Honda EB5000 / EB6500 — Wheel Kit Installation
Installation · Wheels and stands
For the Honda EB5000 / EB6500, from the Honda owner's manual.
Applies to: Honda EB6500, Honda GX390T2 engine
Procedure
- Install the two stands on the under frame using four 8×16 mm flange bolts.
- Install the two wheels on the axle shaft using the washers and split pins; bend the pins.
- Install the axle assembly using four 8×16 mm flange bolts and 8 mm flange nuts.
- Torque to 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m).
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m)
Full service-parts list: Honda EB6500 →, Honda GX390T2 engine →
Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.