Honda EB5000 / EB6500 — Hanger Kit Installation
Installation · Lifting hanger
For the Honda EB5000 / EB6500, from the Honda owner's manual.
Applies to: Honda EB6500, Honda GX390T2 engine
Procedure
- Position the hanger at the generator's balance point.
- Fit the end tabs of the hanger through the bracket slots.
- Bolt the brackets to the hanger and tighten securely.
- Torque to 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m).
Tools required
- 12 mm wrench (2) Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m)
Full service-parts list: Honda EB6500 →, Honda GX390T2 engine →
Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.