Honda EB5000 / EB6500 — Handle Installation
Installation · Folding handle
For the Honda EB5000 / EB6500, from the Honda owner's manual.
Applies to: Honda EB6500, Honda GX390T2 engine
Before you start
- Do not add fuel or oil before tipping the generator.
Procedure
- Install the handle holder assembly on the generator upper frame using the 8×18 mm flange bolts.
- Install the handle assembly on the upper frame pipe using 8×16 mm flange bolts, handle bush A, handle bush B, and handle lower bracket.
- Torque to 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m).
- Check that the handle folds smoothly and does not hang down by its own weight.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m)
Full service-parts list: Honda EB6500 →, Honda GX390T2 engine →
Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.