Honda EB5000 / EB6500 — Engine Oil Change
Maintenance
For the Honda EB5000 / EB6500, from the Honda owner's manual.
Applies to: Honda EB6500, Honda GX390T2 engine
Before you start
- Wash your hands with soap and water after handling used oil.
- Dispose of used oil properly.
Parts for this job
Part numbers from the service-parts lists for Honda EB6500, Honda GX390T2 engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Place a suitable container below the engine.
- Remove the oil filler cap/dipstick, 12×15 mm drain plug, and sealing washer.
- Allow the used oil to drain completely.
- Reinstall the drain plug and a new sealing washer; tighten securely.
- Fill to the upper limit mark with recommended oil.
- Reinstall the oil filler cap/dipstick securely.
Specs & values
- Torque: 16.3 lbf·ft (22.1 N·m, 2.25 kgf·m)
- Maximum oil capacity: 1.2 US qt (1.1 L)
Full service-parts list: Honda EB6500 →, Honda GX390T2 engine →
Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.