Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Removal and replacement procedure:

Home Generators - Alpha Gen — Removal and replacement procedure:

For these Home Generators - Alpha Gen models: AlphaGen 3.5kW, AlphaGen 5.0kW, CE3X-2.

Browse Home Generators - Alpha Gen generators & specs →

Procedure

  1. 1.
  2. Locate and remove the gas hazard sensor as shown below.
  3. The gas hazard is located on the
  4. outside of the APU housing, above
  5. the pad shear/water intrusion
  6. sensor mounting bracket. It is
  7. attached to the APU housing by
  8. means of a hook and loop fastener.
  9. Pull the sensor free.

Source: manual:3.5kW 5.0kW Operation Maint. Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.